Table of ContentsClick to view all sections
The DRDO CEPTAM 11 Tech-A Tier-2 result was declared on 9 November 2026 for candidates across 15 Technician-A trades. Candidates should use DRDO’s official CEPTAM-11 information to locate the current result directions and check the entry for their post code and trade. The Senior Technical Assistant-B (STA-B) Tier-2 result remains under process, and no declaration date has been announced in the available update.
For shortlisted Technician-A candidates, the result is an important recruitment update, but it is not confirmation of final appointment. The next stage is expected to be a Trade or Skill Test. Document verification and a medical examination are also stated as subsequent stages. DRDO has not announced the Trade or Skill Test date in the available update, so candidates should rely on official notices for the schedule, venue, reporting time and instructions.
DRDO CEPTAM 11 Tech-A Tier-2: DRDO CEPTAM 11 Tier-2 Result 2026: Quick Details
| Detail | Information |
|---|---|
| Recruiting organisation | Defence Research and Development Organisation (DRDO) |
| Recruitment body | Centre for Personnel Talent Management (CEPTAM) |
| Advertisement | CEPTAM-11 |
| Posts | Senior Technical Assistant-B (STA-B) and Technician-A (Tech-A) |
| Total vacancies | 764: 561 STA-B and 203 Tech-A |
| Tier-2 examination date | 15 June 2026 |
| Tech-A Tier-2 result | Declared on 9 November 2026 |
| STA-B Tier-2 result | Under process; date not announced |
| Tech-A trades covered | 15 |
| Next stage for shortlisted Tech-A candidates | Trade or Skill Test; subsequent verification and medical stages are also stated |
The recruitment includes two different posts, and their results should not be confused. The Technician-A result covers 15 trades, while the STA-B result covers 16 subjects and is still under process. The vacancy figures shown above are the total figures provided for CEPTAM-11: 561 STA-B vacancies and 203 Tech-A vacancies, adding up to 764 posts. These figures describe the recruitment as a whole; they do not indicate how many candidates have been shortlisted for a particular trade.
Important Dates
| Event | Date or status |
|---|---|
| Online application began | 11 December 2025 |
| Application deadline | 11 January 2026, 11:55 PM |
| Tier-1 examination | 23 March 2026 |
| Tier-1 answer key | 25 March 2026 |
| Tier-1 result | 25 May 2026 |
| Tier-2 admit card | 12 June 2026 |
| Tier-2 examination | 15 June 2026 |
| Tier-2 answer key | 18 June 2026 |
| Tech-A Tier-2 result | 9 November 2026 |
| STA-B Tier-2 result | To be notified; the result is under process |
| Tech-A Trade or Skill Test | Date not announced in the available update |
The dates provide a timeline from the opening of applications through the Tier-2 result announcement. The application period ended on 11 January 2026, so this result update concerns candidates who took part in the recruitment process. The Tier-2 examination was held on 15 June, and the answer key was listed on 18 June. The Tech-A result followed on 9 November. No date is supplied for the next test, so do not infer a schedule from the result date or from unofficial posts.
How to Check DRDO CEPTAM 11 Tier-2 Result 2026
The result is described as available through the CEPTAM result portal. A direct result URL could not be verified from the official link available for this update. Start from DRDO’s official CEPTAM-11 recruitment information and follow the current result directions shown there. The DRDO CEPTAM 11 Tech-A Tier-2 result information may be presented by post code and trade, so check that you are looking at the correct category before interpreting a status.
| Step | What to do |
|---|---|
| 1 | Open the official DRDO website and go to the CEPTAM-11 recruitment or result information. |
| 2 | Look for the current CEPTAM-11 result notice or result-portal direction. Use the link or instructions provided on the official page. |
| 3 | Select the Technician-A or Tech-A result option if it is displayed. Do not select STA-B when checking a Technician-A result. |
| 4 | Identify the relevant post code and trade in the displayed information. |
| 5 | Follow the result or status link shown for that trade and check the candidate information or shortlisted-candidate list made available there. |
| 6 | Read the notice accompanying the result, if provided, for any qualification or next-stage directions. |
| 7 | Save or print the result information for your own reference and return to the official page for later notices. |
Before you begin
Use the official DRDO page as your starting point rather than relying on a copied URL or a search result from an unknown site. The available update does not verify a direct result URL, and the official page may provide the current route to the result. If the page presents separate options for posts, trades or post codes, take a moment to match those details with your application information. A result page for another trade or for STA-B cannot establish your Tech-A status.
Keep the result notice and any status information you access for reference. This is a practical record-keeping step, not a substitute for instructions in a later official notice. If the result page does not load or a link is unavailable, return to the official CEPTAM-11 information and check for updated directions rather than assuming that an unofficial copy is complete or current.
Post-Wise Result Status
| Post | Coverage stated in the update | Tier-2 result status |
|---|---|---|
| Technician-A (Tech-A) | 15 trades | Declared on 9 November 2026 |
| Senior Technical Assistant-B (STA-B) | 16 subjects | Under process; date not announced |
The two post categories have different result statuses. The Technician-A result has been declared, while the STA-B result is not reported as declared in the available update. The statement that the STA-B result is under process does not provide a release date. Candidates for that post should wait for an official announcement rather than treating the Tech-A declaration as confirmation that both results are available.
For Tech-A, the result covers the following trades:
- Book Binder
- Carpenter
- Computer Operator and Programming Assistant (COPA)
- Draughtsman (Mechanical)
- Electrician
- Electronics
- Fitter
- Machinist
- Mechanic (Motor Vehicle)
- Optical Worker
- Photographer
- Sheet Metal Worker
- Surveyor
- Turner
- Welder
This list is useful when navigating the result information: check the trade name and post code shown in the official result directions, rather than relying only on the general announcement that the result has been declared. The 15 trades listed above describe the result’s coverage. They do not supply trade-wise cut-offs, candidate counts or individual marks.
What the Result Contains
The available result information is described as being organised by post code and trade, with a candidate’s result status and a shortlisted-candidate list. The precise layout may depend on the official result page or notice, so use the instructions displayed there. Check the relevant category carefully and read any accompanying directions to understand what the result communicates and what action, if any, is required next.
The available update does not provide confirmed cut-off marks, section-wise marks or merit ranks. It also does not establish that a particular status guarantees appointment. Avoid treating numbers or rank claims circulated elsewhere as official unless DRDO publishes them. If DRDO issues separate marks information or a further selection notice, that official communication should be used to interpret it.
When reviewing a result, distinguish between three separate things: the announcement that results are declared, the status shown for a candidate, and the instructions for the next recruitment stage. The general announcement confirms the result release for the stated trades; a candidate should consult the relevant result entry for their own status; and any later notice should be checked for test arrangements. One item does not automatically supply details that have not been announced in another.
Next Stage for Shortlisted Tech-A Candidates
Shortlisted candidates are expected to proceed to a Trade or Skill Test. Document verification and a medical examination are also part of the stated subsequent stages. The available update does not give a Trade or Skill Test date, venue, reporting time, document checklist or detailed test instructions. Therefore, qualifying at Tier-2 should be treated as progression to the next stage—not as final appointment or completed selection.
Until a schedule is issued, candidates can take sensible administrative steps without assuming requirements that DRDO has not announced. Keep application details and result information accessible. Check the official CEPTAM-11 page periodically for a notice that explains the next stage. When that notice is available, read it in full and follow its trade-specific directions. The official notice, rather than general advice or an old schedule, is the source for exact arrangements.
- Monitor official updates: Return to DRDO’s CEPTAM-11 information for a Trade or Skill Test notice and any later instructions.
- Keep relevant information together: Retain access to your application details and the result information so you can refer to them when reading a notice.
- Read trade-specific directions: Use the instructions issued for your trade. Do not assume that arrangements for another trade will apply to you.
- Wait for confirmed logistics: Do not assume a date, venue, reporting time or required materials before those details are stated by DRDO.
- Review verification instructions when issued: Document verification is a stated subsequent stage, but the documents and process should be taken from the official notice.
- Follow the official sequence: Use the order and requirements specified in DRDO’s communications rather than relying on an informal summary.
These steps are intended to help candidates follow the process without filling gaps with speculation. For example, a candidate may want to plan travel or assemble paperwork, but the available update does not provide a test venue or document list. Wait for the official directions before treating any such details as confirmed.
Common Result-Checking Mistakes
- Opening the wrong post category: Tech-A and STA-B are separate result categories. Confirm that the result information is for Technician-A before checking a Tech-A status.
- Overlooking the trade or post code: The Tech-A result covers 15 trades. Match the result entry to the correct trade and post code rather than relying on the broad result announcement alone.
- Assuming the STA-B result has been released: The available update says the STA-B Tier-2 result is under process and that no date has been announced.
- Confusing a shortlist with final selection: Shortlisted Tech-A candidates are expected to attend the Trade or Skill Test, with verification and medical stages also stated afterward.
- Trusting unverified cut-offs or ranks: Confirmed cut-off marks, section-wise marks and merit ranks are not provided in the available update.
- Using an unverified direct link: A direct result URL was not verified for this update. Begin at DRDO’s official CEPTAM-11 information and follow its current directions.
- Assuming the next-stage schedule: The Trade or Skill Test date is not announced in the available update. Do not treat an unofficial date as confirmed.
- Missing later instructions: A result announcement is not necessarily the only notice candidates need. Continue checking official information for the schedule and stage-specific requirements.
Frequently Asked Questions
Is the DRDO CEPTAM 11 Tech-A Tier-2 result out?
Yes. The Technician-A Tier-2 result was declared on 9 November 2026 for 15 trades. Candidates should use DRDO’s official CEPTAM-11 information to locate the current result directions and check the appropriate trade and post code.
Has the CEPTAM-11 STA-B Tier-2 result been declared?
No declaration date is provided in the available update. The STA-B result is listed as under process. Candidates should wait for an official DRDO update about its release.
How can I check my Tech-A result?
Open DRDO’s official website, locate the CEPTAM-11 recruitment or result information and follow the current directions for the Tech-A result. Then check the entry for your post code and trade. A direct result URL could not be verified for this update, so use the official page rather than an unverified link.
Which trades are included in the Tech-A result?
The result covers Book Binder, Carpenter, Computer Operator and Programming Assistant (COPA), Draughtsman (Mechanical), Electrician, Electronics, Fitter, Machinist, Mechanic (Motor Vehicle), Optical Worker, Photographer, Sheet Metal Worker, Surveyor, Turner and Welder.
What happens after the DRDO CEPTAM 11 Tech-A Tier-2 result?
Shortlisted candidates are expected to proceed to a Trade or Skill Test. Document verification and a medical examination are also stated as subsequent stages. Candidates should follow DRDO’s notice for the confirmed schedule and instructions; qualifying Tier-2 alone is not final appointment.
Has the Trade or Skill Test date been announced?
No date is provided in the available update. Check the official CEPTAM-11 information for a later notice. The schedule, venue, reporting time and other arrangements should not be assumed before DRDO issues them.
Are cut-off marks, section-wise marks or merit ranks available?
The available update does not provide confirmed cut-off marks, section-wise marks or merit ranks. Refer to DRDO notices for any separate official marks information.
Does qualifying Tier-2 confirm final selection?
No. Shortlisted Tech-A candidates are expected to complete further stages, including the Trade or Skill Test and the stated subsequent verification and medical requirements. Follow the official recruitment notices for the applicable process.
How many vacancies are included in CEPTAM-11?
The total stated vacancy count is 764: 561 for STA-B and 203 for Tech-A. These figures are the overall vacancy figures provided for the recruitment; they are not a count of candidates shortlisted in the result.
When was the Tier-2 examination held?
The Tier-2 examination was held on 15 June 2026. The Tier-2 admit card date listed in the update is 12 June 2026, and the Tier-2 answer key date is 18 June 2026.
Important Links
| Resource | Details |
|---|---|
| DRDO CEPTAM-11 official recruitment information | Open the official DRDO page |
| Direct Tech-A result link | A direct result URL was not verified for this update. Use the official DRDO page above to find current result directions. |
Final Takeaway
The DRDO CEPTAM 11 Tech-A Tier-2 result was declared on 9 November 2026 for all 15 Technician-A trades. Candidates should check the official result information for their own post code, trade and status, then continue to monitor DRDO’s CEPTAM-11 page for the Trade or Skill Test notice. The date for that test has not been announced in the available update. The STA-B result remains under process, with no declaration date announced. Treat official DRDO communications as the source for result directions and all subsequent-stage requirements.
Comments (1)