Table of ContentsClick to view all sections
- ICF Ex-ITI Apprentice Result 2026: Ex-ITI Provisional Select List at a Glance
- How Many Candidates Are Selected Trade-Wise?
- What Does the ICF Ex-ITI Provisional Select List Show?
- How to Check Your Name
- What’s Next After the Select List?
- About the ICF Trade Apprentice Recruitment
- Common Checks Before Relying on Your Result
- ICF Ex-ITI Select List 2026: Essential Link
- Final Takeaway
The ICF Ex-ITI Apprentice Result 2026 is a provisional select list issued by Integral Coach Factory (ICF), Chennai. The notice, dated 12 November 2026, names 286 candidates under the Ex-ITI quota. It states that candidates are arranged in merit order based on Class X marks. A name on the list does not complete the selection process: the notice makes selection subject to verification of original documents at the time of contract generation.
This guide explains what the notice says, how to check an entry, how the trade-wise counts relate to the list, and what candidates should keep in mind while waiting for further instructions. It distinguishes the 286 candidates named in this Ex-ITI list from the larger slot figures mentioned in the recruitment and select-list notices. Where the available notice details do not give a date or rule, this article does not assume one; candidates should check ICF’s official website for subsequent updates.
ICF Ex-ITI Apprentice Result 2026: Ex-ITI Provisional Select List at a Glance
| Detail | Information |
|---|---|
| Organisation | Integral Coach Factory (ICF), Chennai |
| Engagement | Act Apprentices under the Apprentices Act, 1961 |
| Result notice | No. PB/RR/39/ACT.APP./2026-2027, Office of the PCPO |
| Reference notification | No. APP/01/2026-2027, dated 08.08.2026 |
| Notice date | 12 November 2026 |
| Group covered by this list | Ex-ITI candidates |
| Number of candidates listed | 286, provisionally selected |
| Selection basis stated in the notice | Merit order based on Class X marks |
| Next stated condition | Verification of original documents at the time of contract generation |
| Current status | Provisional select list released |
The list is specific to Ex-ITI candidates and should be read as a provisional result notice, not as a complete statement of every recruitment condition. Its stated merit basis is Class X marks. The notice details summarized here do not provide a full explanation of how every possible tie or eligibility situation is handled, so candidates should not infer additional selection rules from the trade-wise totals alone. For the recruitment’s eligibility conditions and other rules, refer to the original notification and any later official instructions.
How Many Candidates Are Selected Trade-Wise?
The notice lists 286 candidates across six trades. The figures below describe the Ex-ITI provisional list only. They are not a count of all apprentice slots in the recruitment notification, nor do they represent the number of candidates in every recruitment category or group.
| Trade | Candidates listed |
|---|---|
| Electrician | 140 |
| Fitter | 104 |
| Welder | 27 |
| Machinist | 8 |
| PASAA | 6 |
| Carpenter | 1 |
| Total | 286 |
Electrician has the largest count in this list, followed by Fitter. The other four trades together account for the remaining entries. These numbers are useful for understanding the composition of this particular provisional list, but they do not establish an individual candidate’s rank, probability of later confirmation, or the number of vacancies available in another recruitment group. Candidates should rely on their own row in the official list and the instructions issued by ICF rather than drawing conclusions from the overall totals.
What Does the ICF Ex-ITI Provisional Select List Show?
When checking the ICF Ex-ITI Apprentice Result 2026, candidates can use the select-list tables to review candidate-level information, including serial number, application number, applicant name, date of birth, community, Class X percentage and a “Selected against” entry. The columns allow a candidate to compare the listed details with the information submitted in the application and to identify the trade and category slot shown for the selection.
The “Selected against” field is part of the entry and should be read along with the trade heading and the rest of the row. Do not assume that a name appearing in a trade table by itself explains every aspect of the selection. Check the application number and other identifying details as well. The list is described as provisional, and the notice states that original documents will be verified at contract generation. Therefore, the entry is not a substitute for that later verification.
In particular, the Class X percentage shown in a row can help a candidate confirm that they are looking at the correct entry, while the notice’s stated selection basis is merit order using Class X marks. The table should not be treated as a separate notification of eligibility rules, document requirements, contract dates, or final appointment status. Those matters should be checked against the recruitment notification and any later official notice.
How to Check Your Name
- Open the official ICF website. Use the Integral Coach Factory website and look for the Act Apprentice or recruitment information relating to the Ex-ITI provisional select list.
- Open the select-list notice. Check that the notice is the Ex-ITI list and note its reference and date so that you do not confuse it with another recruitment document.
- Go to your trade’s table. The list is arranged by trade. Check the relevant section before deciding that your entry is not present.
- Find your application number. Compare the number with your application records. If using a document search tool, search for the application number and then confirm the matching row rather than relying on the search result alone.
- Cross-check the other fields. Compare the applicant name, date of birth, community and Class X percentage shown in the row with your records, where applicable.
- Read “Selected against”. Check the trade and category slot information shown in that column as part of your entry.
- Keep a copy for reference. Save or print the official notice for your records, and continue to follow later instructions published by ICF.
Names can be similar, and a search result may point to text in a different row or section. For that reason, use the application number as a primary check and verify the full row. If your name appears but another detail seems different, do not guess which entry is yours or treat the mismatch as resolved. Refer to the official notice and await or seek clarification through the official channels identified by ICF.
If you do not find your entry, first confirm that you opened the Ex-ITI list, checked the correct trade table and searched the application number accurately. The published trade-wise counts can also help you confirm that you have reviewed all six listed sections. These checks can prevent a missed entry caused by looking in the wrong table, but they do not change the published result. The official list and any subsequent correction or instruction from ICF remain the authoritative sources.
What’s Next After the Select List?
Being named in the ICF Ex-ITI Apprentice Result 2026 does not by itself complete the process. The notice says the selection is subject to verification of original documents at the time of contract generation. The notice details covered here do not specify the date for contract generation or document verification. Candidates should therefore avoid relying on an assumed schedule and check the ICF website for any later notice.
While waiting for an official update, candidates can take practical steps without assuming requirements that are not stated in the result notice:
- Keep the application details and a copy of the provisional select-list notice accessible.
- Review the original recruitment notification and any later official instructions for the applicable document requirements.
- Keep the original documents relevant to the information in the application available for checking, but use ICF’s official instructions to determine what must be presented and when.
- Check that the application number, name, trade and “Selected against” entry in the list match your records.
- Monitor the official ICF website for the date, venue, process or other instructions if these are announced in a later notice.
- Do not treat provisional selection as final confirmation before the stated verification and any subsequent steps are completed.
The result notice’s reference to verification at contract generation is the key next-step information presently established here. It does not give a document checklist, a reporting location, a timetable, or a separate confirmation date. Those details should not be inferred from the publication date of the select list. If ICF issues a later instruction, follow that instruction and check that it applies to the Ex-ITI candidates and trade concerned.
About the ICF Trade Apprentice Recruitment
The provisional list refers to the ICF Trade Apprentice Recruitment 2026 notification, reference No. APP/01/2026-2027, dated 08.08.2026. The trades named in that recruitment notice are Fitter, Welder, Electrician, Machinist, Carpenter, Painter, MLT and PASAA. The recruitment notification states 1,010 apprentice slots overall. Separately, the Ex-ITI select-list notice refers to 680 notified slots, while this particular list names 286 Ex-ITI candidates.
| Recruitment detail | Information available |
|---|---|
| Recruitment | ICF Trade Apprentice Recruitment 2026 |
| Reference number | APP/01/2026-2027, dated 08.08.2026 |
| Trades named in the recruitment notice | Fitter, Welder, Electrician, Machinist, Carpenter, Painter, MLT and PASAA |
| Slots stated for the recruitment notification | 1,010 apprentice slots |
| Slots referred to in the Ex-ITI select-list notice | 680 notified slots |
| Ex-ITI candidates in this provisional list | 286 |
These figures have different scopes and should not be added together or treated as interchangeable. The 1,010 figure is the overall slot total stated in the recruitment notification. The 680 figure is the number of notified slots referred to in the select-list notice. The 286 figure is the number of Ex-ITI candidates included in this particular provisional list. The result notice summary does not explain every relationship between these figures, so the safest interpretation is to retain the scope stated for each one.
The recruitment notice, rather than the provisional result list, is the source to consult for eligibility, age limits, relaxation, fees, stipend, vacancy breakdown and other application conditions. Those details are not established by the result notice summarized here. Candidates should review the original notification and later official instructions for their own circumstances instead of relying on a summary of the select list for recruitment rules.
Common Checks Before Relying on Your Result
- Confirm the notice type: Make sure you are checking the Ex-ITI provisional list, not a different recruitment notice or list.
- Use the right trade table: The list is divided by trade. Check the relevant table and, if necessary, review each listed section before concluding that an entry is absent.
- Match the application number: A matching name alone may not be enough to identify a row. Compare the application number and other details.
- Read the full row: Check the trade heading and “Selected against” field, as well as the candidate details shown in the row.
- Remember that selection is provisional: The notice makes it subject to original-document verification at contract generation.
- Do not assume a verification date: No date is stated in the notice details covered here. Look for a later official update.
- Use the recruitment notification for rules: The result notice does not provide the complete eligibility and application conditions.
- Use official information for next steps: Do not rely on an unofficial timetable or an assumed document checklist when the notice does not state one.
ICF Ex-ITI Select List 2026: Essential Link
| Resource | Link |
|---|---|
| Integral Coach Factory official website | Visit ICF’s official website |
Use the official website to locate the relevant recruitment notice and check for subsequent instructions. This article does not provide a separate direct PDF link; candidates should confirm they are viewing the correct official notice before relying on its contents.
Final Takeaway
The ICF Ex-ITI Apprentice Result 2026 is a provisional list of 286 candidates across Electrician, Fitter, Welder, Machinist, PASAA and Carpenter. The notice states that selection is based on merit order using Class X marks and is subject to verification of original documents at contract generation. Candidates who find their details should verify the complete row, keep the notice for reference and follow ICF’s official website for further instructions. The list does not provide a verification date, and its candidate count should not be confused with the separate slot totals in the recruitment documents.
Frequently Asked Questions
Has ICF released the Ex-ITI Apprentice Result 2026?
ICF has issued the ICF Ex-ITI Apprentice Result 2026 as an Ex-ITI provisional select list dated 12 November 2026. It names 286 candidates. The notice describes the selection as provisional and says original documents will be verified at the time of contract generation.
How many candidates are named in the ICF Ex-ITI select list?
The list names 286 candidates across Electrician, Fitter, Welder, Machinist, PASAA and Carpenter. The trade-wise counts are 140, 104, 27, 8, 6 and 1 respectively.
What selection basis does the notice state?
The notice says candidates are arranged in merit order based on Class X marks. For any additional selection or eligibility rules, consult the original recruitment notification and any later official instructions.
How can I find my entry?
Open the official select-list notice, go to your trade’s table and check your application number. Then compare the name and other details in the row and read the “Selected against” entry. Do not rely on a similar name without checking the application number.
Is the selection final?
No. The list is provisional. The notice makes selection subject to verification of original documents at the time of contract generation, so a listed name should not be treated as final confirmation of completion of the process.
Has ICF announced the document-verification date?
No date is given in the notice details covered here. Check ICF’s official website for any later schedule or instructions, and do not rely on an assumed date.
How many apprentice slots were mentioned in the recruitment documents?
The recruitment notification states 1,010 apprentice slots overall. The Ex-ITI select-list notice refers to 680 notified slots, and this particular provisional list names 286 candidates. These are figures with different scopes.
Where can I check eligibility, age limits and other conditions?
Refer to ICF’s original Trade Apprentice Recruitment 2026 notification and any subsequent official instructions. The provisional result notice does not provide the full recruitment rules, including the details needed to assess every candidate’s eligibility.
What should I do if a detail in my row does not match my records?
Check that you are reading the correct trade table and compare the application number and all available row details. Do not assume a mismatch is harmless or decide that another similar entry belongs to you. Use ICF’s official notices and channels for clarification or follow any later instructions issued by the organisation.







Comments